The WVC2300 Camera can be mounted on any Pan-Tilt (PT) base that supports the Pelco D protocol and can be remotely rotated and controlled through an RS-485 interface. The WVC2300 also has two input and two output ports which can be used for connecting the camera to an alarm panel, siren, Passive InfraRed (PIR) sensors, smoke detectors, lighting switch (on/off), door sensors, etc. The WVC2300 uses a high-quality progressive scan CCD Sensor delivering good quality video. The CCD sensor also has low-light sensitivity so video can be captured even in very low light environments or during "near dark" times of day. Additionally, the camera incorporates an IR Cut Filter which, when used with a separate IR lamp, allows for video capture in total darkness. The WVC2300 Surveillance Camera supports dual codecs (MPEG-4 and MJPEG). Both codecs can be used simultaneously. MPEG-4 gives efficient bandwidth consumption with good quality compression and is optimal for real-time viewing of video. MJPEG gives optimal video quality with lossy compression making it ideal for large volume storage to a NAS device. The WVC2300's audio capabilities include 2-way Audio, embedded Microphone, external speaker and microphone ports, and voice compression. With extensive feature support like IP Multicast, RTSP, RTP, and 3GPP, video can be viewed from multiple endpoints and client applications like 3G phones, and Quicktime clients on PCs or WiFi phones. The Wireless capabilities of the WVC2300 include support for 1x2 MIMO, providing better range than traditional 802.11g, and strong wireless security utilizing WPA. Support for multiple network protocols like 802.1p priority, 802.1q VLANs, and Dynamic DNS, make the solution ideal for multiple IP Surveillance applications. The 2300-series cameras can also be managed securely using HTTPS. Linksys Business Series Surveillance Cameras are also Linksys One Ready. That means they include the necessary firmware to be integrated into a Linksys One data or data/voice network