The high-performance AIM-ATM enables voice and data traffic to be carried over ATM networks using AAL2 and AAL5 encapsulation, when installed in Cisco router. It is used in conjunction with a T1/E1 voice/WAN interface card (VWIC-MFT) for circuit-mode data and frame-mode data over ATM infrastructures, supporting up to four T1/E1 WAN interfaces. When using the voice digital signal processor (DSP) capability of a digital T1/E1 packet voice trunk network module (NM-HDV) and a T1/E1 multiflex VWIC, it supports as many as 60 channels of compressed voice over a T1/E1 trunk using AAL2 or AAL5. In addition, Analog voice over ATM is enabled with a voice/fax network module (NM-1V or NM-2V) and a two-port voice interface card (VIC), which supports as many as four analog voice calls using AAL5.
Features
Type: Network Adapter
Form Factor: Plug In Module
Data Link Protocol: ATM
Network Protocol: VoIP
Line Rate: T1, E1
System Requirements: Cisco IOS 12.2 (2) XA, Cisco IOS 12.2(4)T
Cisco ATM Network Adapter for 3600 and 3660 Series Platforms Specifications
Part # AIM-ATM=
Manufacturer
Cisco
Manufacturer Part #
AIM-ATM=
Device Type
Network adapter
Form Factor
Plug-in module
Dimensions
3.3 in x 5.2 in x 0.2 in
Data Link Protocol
ATM
Line Rate
T-1/E-1
Network / Transport Protocol
VoIP
Compatible Slots
1 x expansion slot
Min RAM Size
64 MB
OS Required
Cisco IOS 12.2(2)XA, Cisco IOS 12.2(4)T
Cisco ATM Network Adapter for 3600 and 3660 Series Platforms Features
Available Protocols:
ATM
RSVP
MpoA
PPPoA
NHRP
VoIP
VoATM
Cisco ATM Network Adapter for 3600 and 3660 Series Platforms Included Items
Cisco ATM Network Adapter for 3600 and 3660 Series Platforms
Installation Guide
Cisco ATM Network Adapter for 3600 and 3660 Series Platforms Warranty Information
Warranty Length: Ninety (90) Days
Covers: Hardware
Details: Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of the RMA request. Actual delivery times may vary depending on Customer location.
Provider: Cisco
Contact: By Phone: Cisco Support 1-800-553-2447 or 1-408-526-7209
Cisco ATM Network Adapter for 3600 and 3660 Series Platforms Video
1.800.814.5410 
858.764.8900 Mon-Fri 6AM-4PM PT
