"LIST PRICE" is the suggested retail price provided to Super Warehouse by our suppliers.
Super Warehouse makes no claim that these products have been sold or offered for sale at the list price.
The retail price in your area may be substantially different.
It is not possible for Super Warehouse to know if the merchandise has been sold at the list price
at any time, any where, as we sell our products over the internet both nationally and internationally.
"Total Savings" reflects the difference between our price and the supplier provided list price shown on our sites.
Since actual retail pricing in your area may be different than the list price shown on our site,
you may not actually realize a savings of this amount.
You may make a comparison yourself by checking the prices of your local retailers
or other internet companies before buying from Super Warehouse.
Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries
Results storage
Up to 250 qualification test results
Other battery types supported
4 AA photo lithium, NIHM, NICAD
Find fault
Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application
Wiremap
Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.
Supported tests
Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.
Product
LinkRunner Pro Network Multimeter
Media Access
10BASE-T, 100BASE-TX, 1000BASE-T (IEEE 802.3), and PoE (IEEE 802.3af)
Cable Tests
Pair lengths, opens, shorts, splits, crossed, straight through, and cable ID
Tone Generator
IntelliTone digital tone: [500 KHz]; analog tones: [400Hz, 1KHz]
User Interface (UI)
Display: black and white, 2” x 1” display, link LED; control: five push-buttons for selection of icons and navigation of menus; power: on/off button
Ports
Test ports: RJ45 ports (2): network test port, loop-back wire map port; Application port: mini-USB
Power Source
4 AA batteries
Physical Security
Kensington Lock
Weight
10 oz (311 grams) with batteries installed
Dimensions
5.3”h x 3.1”w x 1.3”d (13.46cm x 7.87cm x 3.30cm)
Operational Security
IEEE 802.1X option for network authentication
Operating Temperature
10-40 degrees C
Battery Charging
Temperature
0-30 degrees C
Storage Temperature
20 to 60 degrees C
Operating Humidity
95% relative humidity (non-condensing)
Vibration
Meets requirements for MIL-PRF-28800F for Class 2 random vibration
Agency Certifications
Certified to US and Canadian CSA standards; N10140 C-Tick EMC standard; FCC Part 15 Class A; CE European Union Directives Pollution Degree 2
LinkRunner Connect Software
Operates on Windows XP and 2000; supports English, Spanish, French, German, Simplified Chinese, and Japanese
Product
IntelliTone Pro 200 Probe
GENERAL SPECS
Operating temperature
32 °F to 104 °F (0 °C to 40 °C)
Storage temperature
-4 °F to +140°F (-20 °C to °C)
Operating relative humidity (% RH without condensation)
95 % (50 °F to 95 °F; 10 oC to 35 °C)
75 % (95 °F to 104 °F; 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C)
Vibration
Random, 2 g, 5 Hz-500 Hz
Shock
1 m drop test with and without module
Safety
EN 61010-1 1st Edition Amendments 1, 2
Altitude
3000 m
EMC
EN 61326-1
Battery type and life
9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
Applications
Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. POTS telecom service and UTP cable. Shielded Twisted Pair supported in Cablemap function of the IntelliTone 200.
TONER SPECS
Dimensions
5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)
Display
LED
Control
Thumbwheel switch
Toner interface
Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiring
Toner frequency
IntelliTone signal: encoded digital signal
Analog SmartTone signal: 500 - 1200Hz, 4 songs
Talk battery voltage
6 V into 600 W
Ouptut power
5 V p-p
Voltage protection
100V
Auto power down
Turns off automatically after 2 1/2 hours of inactivity
PROBE SPECS
Dimensions
8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)
Display
(8) LED indicators, Synch LED indicator
Audio
IntelliTone: Microprocessor controlled audio files
Analog: Detected toner signal
Control
Thumbwheel switch, volume control wheel
Tone detection
Detects IntelliTone digital signal for Locate, Isolate, and CableMap
Detects analog SmartTone signal (500-1200Hz) and other analog toners.
Toner interface
Main Mod8 port for cablemap on all 4 pairs of UTP / STP cabling.
Auto power down
Turns off automatically after 1 hour of inactivity
