Bretford 42-E4 42in AV Cart

SHELF
Cart shall have three 20-gauge steel shelves, measuring 24"W x 18"D. Each shelf shall be press formed with a 1/4" lip bordering the top surface on all four sides. The top shelf shall have a 20-gauge steel stiffener electrically welded underneath the surface front to back. A Black rubber 24"W x 18"D mat shall be placed on the top shelf. The shelf shall have two 3/16" diameter holes centered on both the right side and the left side to accept an electrical assembly. Cart shall be recommended for use with up to a 20" diagonal monitor.

LEGS
There shall be four, 14-gauge steel legs welded to the shelves at each corner. A hard plastic caster insert shall be mounted to each leg.

CASTERS
Casters shall be mar- resistant, Black hard rubber and 4" or 5" in diameter. Each caster assembly shall have ball bearing swivel capabilities and steel construction. Two shall have locking brakes.

TWO-OUTLET ELECTRICAL UNIT
Completely enclosed electrical unit will have two grounded outlets, 20 ft. 3-wire cord and two 3/16" diameter machine screws with wing nuts for attaching unit to pre-drilled holes in the top shelves. The left side of the top shelf shall have holes to accept the electrical assembly. Electrical assembly shall be UL listed when attached to the cart

RECYCLED CONTENT
Traditional AV Carts are constructed using “prime” steel that has a 25% to 35% post-consumer recycled steel content. Steel components are finished in a powder paint that is reclaimable and greatly reduces volatile organic compounds